Gateway problems 0.0.0.0 / Domain over hamachi - How do I do that? [ Edited ]

[VMunich]

Ok, I have Windows Server 2008 Enterprise installed on a KVM Virtual Machine. 

It has one NIC (network interface card) with the external ip configured.

I installed hamachi client, then I made a gateway network.

Then Hamachi bridged some things and did its job.

http://s9.postimage.org/elpwzsfzx/image.jpg

Then, I added my laptop to the network as a guest.

After that, this is what I see on the gateway/windows2008 server:

http://s10.postimage.org/56fyyvfdz/lap.jpg

And this is what I see on the guest:

http://s16.postimage.org/k2iqc0j5v/image.jpg

The gateway's IP is correct. But on the gateway, the guest IP is 0.0.0.0

http://s11.postimage.org/wim8x8s3l/image.jpg

After a while:

http://s13.postimage.org/jk1pu4yhx/image.jpg

Am I doing something wrong?

Do I need some special DHCP or DNS configs?

The Windows 2008 is a fresh install, I just configured the Active Directory/Domain and DNS server. Didn't make the DHCP server and etc..

I guess there is no promiscuous mode on KVM.

[Sean_K]

Try enabling Compatibility Mode for your LAN adapter (not the Hamachi adapter) in the Bridge.

http://support.microsoft.com/kb/302348

Also, you can right click on the network name, and open the Gateway Settings.  Here, specify a range and your DNS values.  As well as any other subnets your network may have.

[VMunich]

Hi Sean,

I did that, but I got no results.

I was using a VIRTIO NIC, now I'm using a Intel e1000.

Is it possible to get domain working over a mesh network? I tried but with a mesh network the guest can't connect to the domain.