Add mobile clients and configure how you want them to connect. To do this, click Add Client and select Add mobile client. Then simply follow the on-screen instructions.
Keep in mind that the mobile client is deployed by sending the required VPN settings in a configuration file via email; it is not an app you download from a store. As a result, there are a few restrictions:
A device can join one gateway network or multiple meshed and hub-and-spoke networks
There is no peer-to-peer connection from the device
Here’s a little tip: If you have connection problems, go to the Preview site > Edit Client > Mobile tab and check the Last login field for the result of the last connection attempt.
Let us know what you think at our LogMeIn.com email of Hamachi-Feedback.
PS: You may be prompted for a PIN Code when setting up the VPN. This is your Device's Unlock code, and it is not being requested by us.
Note: The mobile client is free to use during preview, but is expected to be a premium feature upon release.
Having some difficulty getting the mobile client to work. Here's my first question. Using IPSec as the protocol, the preview image of my Android config shows what appears to be the default (or top line) choice in the pulldown menu for each of the three certificate options:
IPSec user certificate
IPSec CA certificate
(don't verify server)
IPSec server certificate
(received from server)
Are those choices correct as shown (and should be reproduced in my config), or should the installed certificates be selected and named instead? If it's the latter, which certificates go on the user and server certificate lines?
Next question: for the PPTP protocol (yes, I've been trying both), is it correct that no certificates are used and therefore none are sent in the configuration email (even though the email continues to say "open the attachment on the device to apply the configuration")?