I am testing Hamachi free version and I am facing a strange problem.
I installed Hamachi in 2 Windows 10 computers and I created a network. I attached both computers to the network. One computer is in my work place and the other one is at home. Lets call them Work_Computer and Home_Computer.
I want to connect using RDP from Home_Computer to Work_Computer.
The issues is that the Work_Computer appear as "not connected " in the Hamachi application so I can not connect to it.
I have a second solution to remote connect from Home_Computer to Work_Computer and it works.
If I am connected with this second solution to Work_Computer, the Hamachi software shows Work_Computer as "connected" and I can connect to it using RDP. This causes the second solution to disconnect but the Hamachi connection works.
In this situation, If I disconnect the RDP connection, the Hamachi software shows again Work_Computer as "disconnected" and I can not connect to it anymore.
I can repeat this procedure as many times I want and always work the same: connect using RDP with the second solution --> connect using RDP with Hamachi (the second solution disconnects) --> Hamachi Software says "connected " and the RPD connection works --> disconnect RDP --> Hamachi software says "disconnected" --> I can not connect anymore using Hamachi....
Is there any solution for such a estrange behaviour?
If I am loged in front of Work_Computer (with the attached keyboard), I can connec from Home_Computer using Hamachi but, if I close the session, I can not connect any more.
I proposed a work around in this thread
I hope it helps