Conected to a PLC via ethernet port trough cable. Computer IP 192.168.0.1 Mask 255.255.255.0 e PLC IP 192.168.0.10 Mask 255.255.255.0
Conected to Internet via Wifi. Computer01 IP 192.168.2.101 Mask 255.255.255.0 GateWay 192.168.2.1
Wifi Access Point 192.168.2.1 Mask 255.255.255.0
Conected to computer02 trough LogmeIn Hamachi, Computer01 IP 22.214.171.124 Mask 255.0.0.0 computer2 IP 126.96.36.199 Mask 255.0.0.0
I want to have access to PLC via computer02. I try to ping 192.168.0.3 on the computer02 and does not work. I tryed to create a route with a command route add 192.168.0.1 mask 255.0.0.0 188.8.131.52 on the computer01 but it say incorret paramters.
how can i do it.
I have a problem.
PC_1 IP_address 192.168.0.100
it is connected to PLC by cable and connect to INTERNET via WIFI.
IP_address PLC is 192.168.0.1.
PC_2 connect to INTERNET via WIFI.
How can I ping 192.168.0.1 from PC_2 to PLC ? with HAMACHI?