cancel
Showing results for 
Search instead for 
Did you mean: 
New Contributor

How can i access a equipament conected on a Computer trough LogMeIn Hamachi from other computer

Computer01 is:

Conected to a PLC via ethernet port trough cable. Computer IP 192.168.0.1 Mask 255.255.255.0 e PLC IP 192.168.0.10 Mask 255.255.255.0

 

Conected to Internet via Wifi. Computer01 IP 192.168.2.101 Mask 255.255.255.0 GateWay 192.168.2.1

Wifi Access Point 192.168.2.1 Mask 255.255.255.0

 

Conected to computer02 trough LogmeIn Hamachi, Computer01 IP 5.41.170.147 Mask 255.0.0.0 computer2 IP 5.102.240.42 Mask 255.0.0.0

 

I want to have access to PLC via computer02. I try to ping 192.168.0.3 on the computer02 and does not work. I tryed to create a route with a command route add 192.168.0.1 mask 255.0.0.0 5.41.170.147 on the computer01 but it say incorret paramters.

 

how can i do it.

3 REPLIES
New Contributor

Re: How can i access a equipament conected on a Computer trough LogMeIn Hamachi from other computer

I'm not sure if I can help. However the route add subnet mask for 192.168.0.1 should be 255.255.255.255 as you are specifying a route to a single IP address. Hope this useful? It's along time since I used route add :-)
New Contributor

Re: How can i access a equipament conected on a Computer trough LogMeIn Hamachi from other computer

I am doing this exact thing. Have you been able to get it working and what did it take? Thanks.

New Contributor

Re: How can i access a equipament conected on a Computer trough LogMeIn Hamachi from other computer

Hi!

I have a problem.

 

PC_1 IP_address 192.168.0.100

it is connected to PLC by cable and connect to INTERNET via WIFI.

IP_address PLC is 192.168.0.1.

 

PC_2 connect to INTERNET via WIFI.

How can I ping 192.168.0.1 from PC_2 to PLC ? with HAMACHI?