The GoTo Community is currently experiencing some technical issues affecting new posts and comments. We are actively working with our service provider and apologize for the frustration.

Forum Discussion

Quick_Cutter's avatar
Quick_Cutter
Active Contributor
6 years ago
Solved

Using Blackmagic ATEM with GTT

Has anyone tried the new Blackmagic ATEM Mini with GTT?  I've been using GTT for two years with logitech webcams, and I want more control over focus, zoom and picture.  The ATEM mini plugs into the t...
  • AshC's avatar
    AshC
    5 years ago

    I wanted to update the Community on some recent testing we've done with Blackmagic hardware and current Mac operating systems!

     

    This solution should work with Mac OS + Blackmagic ATEM Mini + any HDMI input.  The key is to use OBS (Open Broadcaster Software) as a virtual camera driver to map Blackmagic device output to a proper format to use it in G2W.

     

    1. Install OBS (Open Broadcaster Software)
    2. In OBS create a scene setup with 1280x720@30fps
    3. Make sure the Blackmagic device is on and connected.
    4. In OBS add a Video Capture Device to the scene, open its properties and select Blackmagic device (1280x720)
    5. In OBS now select Start Virtual Camera
    6. In the GoTo desktop software you may now select OBS Virtual Camera as an input device
AshC's avatar
AshC
Retired GoTo Contributor
5 years ago

I wanted to update the Community on some recent testing we've done with Blackmagic hardware and current Mac operating systems!

 

This solution should work with Mac OS + Blackmagic ATEM Mini + any HDMI input.  The key is to use OBS (Open Broadcaster Software) as a virtual camera driver to map Blackmagic device output to a proper format to use it in G2W.

 

  1. Install OBS (Open Broadcaster Software)
  2. In OBS create a scene setup with 1280x720@30fps
  3. Make sure the Blackmagic device is on and connected.
  4. In OBS add a Video Capture Device to the scene, open its properties and select Blackmagic device (1280x720)
  5. In OBS now select Start Virtual Camera
  6. In the GoTo desktop software you may now select OBS Virtual Camera as an input device
PaulDash's avatar
PaulDash
Active Contributor
5 years ago

Hello AshC! Great for someone from LogMeIn to contribute to this thread!

 

What you wrote mirrors my entry from April 19 of last year, however it shouldn't be presented as a solution.  The issue is with the GTM software not supporting 1080p webcam input. Putting OBS and OBS Virtual Camera, two 3rd-party pieces of software, in the middle is merely a temporary workaround.

 

What can we do to help you solve the issue? What can you tell us to enable the FullHD support?

  • BIMtraining's avatar
    BIMtraining
    Regular Visitor
    5 years ago

    We badly need higher resolution for the webcam! Just got the setup for the upgraded training studio: Sony A6400 through Atem Mini Pro ISO connected to a MacBook Pro.  And we can not use it at the full potential. Yes, going through OBS works, but it destroys the quality, specially when teaching a design software like Archicad 😞

  • AshC's avatar
    AshC
    Retired GoTo Contributor
    5 years ago

    PaulDash  As soon as we have an update for increased webcam compatibility we will update the Community.  The solution is marked so new Community members don't have to scroll through the entire thread.