Forum Discussion

dribble12's avatar
dribble12
Active Contributor
6 years ago
Solved

With no monitors at host computer, client gets black screen

With no host monitors there is only a blank screen at the client computer. None of our LogMeIn installs have a mirror driver installed. What needs to change to allow people to see two displays remote...
  • HAWA's avatar
    HAWA
    6 years ago

    Ok, got some information on this from LogMeIn support. If you want to run the workstation to be accessed with no monitors, but want dual (or more) monitor support remotely, then you can use Headless Monitor Emulators plugged in where your 2nd (or more) monitors would be plugged-in. I haven't tried yet, but I did order the emaulators on amazon. You can get 3-packs for under $20 depending on port type.

xdarthx's avatar
xdarthx
New Member
3 years ago

This is absolutely possible. Go to the following site and download this virtual USB monitor:

https://www.amyuni.com/forum/viewtopic.php?t=3030

 

Follow the instruction shown there, it will let you install up to 4 virtual screens, I just tested them and they work with LMI once the real monitors have been disconnected from the host PC.

You're welcome!

GlennD's avatar
GlennD
GoTo Manager
3 years ago

Hi xdarthx, welcome to the community.

 

Thank you for sharing this solution. I took a moment to check the link and the company that provides the virtual display driver and it appears to be legitimate.