Forum Discussion

dribble12's avatar
dribble12
Active Contributor
6 years ago
Solved

With no monitors at host computer, client gets black screen

With no host monitors there is only a blank screen at the client computer. None of our LogMeIn installs have a mirror driver installed. What needs to change to allow people to see two displays remote...
  • HAWA's avatar
    HAWA
    6 years ago

    Ok, got some information on this from LogMeIn support. If you want to run the workstation to be accessed with no monitors, but want dual (or more) monitor support remotely, then you can use Headless Monitor Emulators plugged in where your 2nd (or more) monitors would be plugged-in. I haven't tried yet, but I did order the emaulators on amazon. You can get 3-packs for under $20 depending on port type.

HAWA's avatar
HAWA
Active Contributor
6 years ago

Ok, got some information on this from LogMeIn support. If you want to run the workstation to be accessed with no monitors, but want dual (or more) monitor support remotely, then you can use Headless Monitor Emulators plugged in where your 2nd (or more) monitors would be plugged-in. I haven't tried yet, but I did order the emaulators on amazon. You can get 3-packs for under $20 depending on port type.

M_Todorovic's avatar
M_Todorovic
New Member
3 years ago

Enable screen blanking on the remote connection, and there will be no 'shared display' required between the remote user and the local user.    No amazon parts required.