Welcome! The GoTo Community is currently in Read Only mode while we work on an exciting platform update.
If you need assistance, please contact our toll-free 24/7 Support 

Forum Discussion

Hishiryo's avatar
Hishiryo
New Member
2 years ago

How to configure a Static IP network on Hamachi in Debian 12 Bookworm

Hello, good morning, evening or night, I hope you"re doing well.   Here is my problem: I am trying to configure a static Hamachi network using its CLI on Debian 12 Bookworm, while being connected t...
GlennD's avatar
GlennD
GoTo Manager
2 years ago

Hi Hishiryo,

 

The gw-config command can only be used on the "gateway" client in a Gateway type Hamachi network. It appears your client is not a "gateway" which is why you are seeing that error message.

  
This command is used to configure the IP range, from which the "gateway" client will chose an IP for (and give to) "member" clients in the same Gateway type Hamachi network. It is needed only when there is no DHCP server on the LAN, where the "gateway" client resides, and the IP addresses of the computers are configured manually. When DHCP server is present the "gateway" client can reserve IP address for each "member" clients from the DHCP server.