Forum Discussion

philbud's avatar
philbud
Active Contributor
11 months ago

Windows 7 Host cannot connect

Maybe someone can help me with this....Hopefully! Long story short...We have a remote Windows 7 (32bits) that we cannot upgrade (old software on it). It is isolated from everything except for logmei...
  • smmNick's avatar
    smmNick
    6 months ago

    GlennDI tried the solutions, but none seemed to work. However, your suggestion about certificate was spot on.

     

    I ended up calling support, and spoke to a very patient gentleman by the name of Juan. We basically found the issue to be missing DigiCert Global Root G2. Apparently this is more of an issue for 32-bit version of Windows 7, but 64-bit version is very similar.

     

    To fix this particular issue:

    1.) Download DigiCert Global Root G2 from - https://cacerts.digicert.com/DigiCertGlobalRootG2.crt

    2.) Right click and select "Install Certificate".

    1.  In the wizard, the second page (Certificate Store), ensure you select "Place all certificates in the following store", select Browse...
    2. In the Certificate Store box, tick "Show physical stores"
    3. Expand the folder "Trusted Root Certification Authorities" (second from the top, under Personal)
    4. Select "Local Computer" folder and press OK
    5. Press Next  in Certification Store
    6. Finish!

    LogMeIn control panel instantly came to life and connected again.

     

    Hope this helps!

smmNick's avatar
smmNick
Active Contributor

GlennDI tried the solutions, but none seemed to work. However, your suggestion about certificate was spot on.

 

I ended up calling support, and spoke to a very patient gentleman by the name of Juan. We basically found the issue to be missing DigiCert Global Root G2. Apparently this is more of an issue for 32-bit version of Windows 7, but 64-bit version is very similar.

 

To fix this particular issue:

1.) Download DigiCert Global Root G2 from - https://cacerts.digicert.com/DigiCertGlobalRootG2.crt

2.) Right click and select "Install Certificate".

  1.  In the wizard, the second page (Certificate Store), ensure you select "Place all certificates in the following store", select Browse...
  2. In the Certificate Store box, tick "Show physical stores"
  3. Expand the folder "Trusted Root Certification Authorities" (second from the top, under Personal)
  4. Select "Local Computer" folder and press OK
  5. Press Next  in Certification Store
  6. Finish!

LogMeIn control panel instantly came to life and connected again.

 

Hope this helps!

Kelvin_Perez's avatar
Kelvin_Perez
New Contributor
6 months ago
working perfectly thanks for your help