The GoTo Community is currently experiencing some technical issues affecting new posts and comments. We are actively working with our service provider and apologize for the frustration.
Forum Discussion
command line options during installation ?
Does anyone know where I can find a complete list of cammand line options that can be used during a CLI install of LogMeIn ? I can install, assign to the correct group but I also need to name the L...
ipguy Sorry for the misunderstanding. Currently, we do not appear to have a list of commands publicly available so I am working to correct this.
Host MSI installer's properties - Please note I am still confirming that this list is current
General:
|
HOMESITE |
Sets the domain name of the website that the host communicates with, it is stored in the registry value HKLM\Software\LogMeIn\V5\WebSvc\HomeSite also. |
| RAPORT | Sets the port that service is using, it is stored in the following registry settings: HKLM\Software\LogMeIn\V5\Net\ListenPort, HKLM\Software\LogMeIn\V5\@CurrentPort, HKLM\Software\LogMeIn\ListenerSocket, default is 2002 for LMI, 2000 for RA. |
| LMIDESCRIPTION | Description used to identify the computer, by default it is the computer name. |
| FQDNDESC | If the value is 1 the computers fully qualified DNS name is used as a description, otherwise LMIDESCRIPTION parameter is used. |
| LMIACCESSCODE | If defined and the length is greater than 8 characters it will be set as a CAC (Computer Access Code) for the host machine. |
| INSTALLUSER | "<username> (domain: <domainname>)" of the currently logged on (installing) user. |
| BETA | If set to 1, the installer creates the registry value of 1 in HKLM\Software\LogMeIn\V5\BetaChannel, but beta channel is not working in production, so it's not useful at the moment. |
| AFFILIATEID | Sets the registry value of HKLM\Software\LogMeIn\V5\InstallParams\AffiliateID, that is used as a parameter in CLS communication. |
| INSTALLEDVERSION | Reads the registry value of HKLM\Software\LogMeIn\V5\@ProductVersion to determine the already installed host's version. |
Deploy info:
| DEPLOYID | Identifier used for the deployment, it can be injected into the msi when a deployment link is used. For testing purposes it can be used from the command line as well. |
| REGDEPLOYCODE | Saves this deploycode to the registry item HKLM\Software\LogMeIn\V5\webSvc\DeployCode that will be used by the service later. |
| MAHEMAIL | Email address of MAH (Master Account Holder). |
| ACCOUNTEMAIL | The account's email address, by default it can be retrieved during deploy id verification if deploy id is present. |
| COMPANYNAME | Company name used in the setup screen template. |
| DEPLOYEMAIL | Email address used in the setup screen template. |
| DEPLOYNAME | Name used in the setup screen template. |
Internal config:
| INSTALLDIR | Target directory of the installation, value will be stored in the registry as well in HKLM\Software\LogMeIn\InstallPath. |
| SERVICEPATH | Used internally to store the service executable's path, initialized with the registry value of HKLM\System\CurrentControlSet\Services\LogMeIn\ImagePath if exists otherwise "notavail" value is set. If SERVICEPATH is available then a previous install is updated otherwise clean install is performed. |
| X86DIR | Set to SERVICEPATH\x86 in case of update or INSTALLDIR\x86 in case of clean install. |
| X64DIR | Set to SERVICEPATH\x64 in case of update or INSTALLDIR\x64 in case of clean install. |
| BUILD | Contains the build number (digits after the last dot). |
Proxy settings:
| PROXYENABLED | 1 indicates that proxy server is used otherwise 0. |
| PROXYSERVER | IP address of the proxy server if any. |
| PROXYPORT | Port number of the proxy server if any. |
| PROXYUSEAUTH | 1 indicates that proxy server is using authentication otherwise 0. |
| PROXYUSERNAME | User name used in proxy server authentication if any. |
| PROXYPASSWORD | Password used in proxy server authentication if any. |
| PROXYVERIFYPWD | Confirmation of the password used in proxy server authentication if any. |
Appearance:
| SHOWCLIENT | Reads client's visibility from registry |
| SHOWCONTROLPANEL | Reads control panel's visibility from registry |
| FORCESHOWCLIENT | Default behaviour of client's visibility can be overridden |
| FORCESHOWCONTROLPANEL | Default behaviour of control panel's visibility can be overridden |
| WHITELABEL | TRUE for special white label partners, they are identified with their MAH or account email address (e.g. Continuum). |
| HIDECOMPUTERUSERNAME | 1 indicates that computer user name should be hidden during installation and a registry key (HKLM\Software\LogMeIn\V5\HideComputerUserName) is set to hide it in the application as well. For white label partners it is hidden by default. |
| ACCESSCODESET | Set automatically if LogMeInRemoteUser exists or no password is required, in this case computer user name should be hidden. |
| KIOSKMODE | Reads the value from HKLM\Software\LogMeIn\V5\Appearance\KioskMode and disables client and control panel if true. |
Would one of these, or perhaps a different command stop the install from querying an internal CA even though it is using its own?
Hi scurry, welcome to the community.
Can you provide some more details around the issue you are trying to solve?
Thanks! 🙂
The install is using the default 'self-signed' method but for some reason it is still querying the internal CA on every install. I do have a support ticket open it, but it hasn't progressed, and I came across this case which is the first time I've seen the install commands and was curious if there was a switch/command to suppress any querying of the internal CA or something of that effect.
Thanks Glenn
However, I do not see FORCESHOWCLIENT in your list, is your list a complete list ?
Is it possible to specify a group/folder name for the client to be placed in for easy sorting and classification, we have thousands of clients so we have folders that the clients are grouped into based on location
Is it possible to specify a group/folder name during the installation ?I've updated my last reply with some more, but I'm waiting to get confirmation that they are still current and correct. I'll have more information on Monday.
Thanks Glenn
Eagerly awaiting your reply
Can I also ask you to confirm if it's possible to pass the "folder" name to the installer via a CLI parameter ?
