cancel
Showing results for 
Search instead for 
Did you mean: 
New Contributor

Remote Gateway with 2 Network Adapters

I wanted to use Hamachi to have our on site techs use their Hotspot to connect to the internet via wifi and have the Hamachi pass the wired connection to the equipement racks so a remote support guy can log into the network and see the wired adapter of the on site guy so the remote support guy can see all of the gear in the rack to make changes to the systems. When we try this we only get the IP address of the WIFI adapter so there is no way to get to the rack. 

ie. The onsite guy gets 172.20.xx.xx on his wifi so the remote support user sees that address but the onsite guy has his computer wired to the rack with a 192.168.1.xxx address. 

Is there a way to "bridge" or forward everything so the remote support guy gets the 192.168.1.xx  network rather than the 172.20.xxx.xxx network? 

 

1 REPLY
Highlighted
New Contributor

Re: Remote Gateway with 2 Network Adapters

Just to update. I do have the Gateway settings in remote network tab for a 192.168.1.0 mask of 255.255.255.0 network. It is a windows 10 machine and I am not able to ping or talk to the 192.168.1.10 device on the gateway side. I can ping the 192.168.1.10 from the gateway machine. The gateway machine has a IP address of 192.168.1.169 with a mask of 255.255.255.0 no other gateway set in that adapter or dns.