Hello, for years I have problems with relayed tunnel and I have no idea how to fix it. I've tried so many options but nothing worked. I even changed my router 3 times. And I dont speak about reinstalls. I made them countless times. Here's my problem: http://screenshot.cz/RR5HW/ I have relayed tunnel with friend, but all diagnosis says that it's ok. It worked yesterday somehow! But today ... It's again in relayed tunnel and I have no idea why. We didn't change anything. We disabled the firewall, antiviruses and portforwarded the ports: http://screenshot.cz/43WM6/ Even the global diagnosis tool in Help says that's tunnels are OK. Why we have a Relayed tunnel then? http://screenshot.cz/YLDL8/ + I'm missing some files. I don't know what to do with that, I reinstalled it 5 times (all clear instalation with registers) but it still says I need to reinstall.
Any suggestions? We can't play with direct tunnel and ping 200ms+
Operating systems are both Windows 7 x64, using newest drivers and newest version of Hamachi.
If you receive a Relayed Tunnel (Cyan indicator), you may need to set a static TCP or UDP port for Hamachi to use when accepting connections. This is generally necessary when you have a computer behind a router or NAT device and its support of NAT is poor. In this case, you would need to set up a static port forward on the router/NAT, and then fix a static port in Hamachi.
For Port Fowarding, please note that every device is different, and very detailed info per device can be found on PortForward.com. If you are setting up port forwarding, it is recommended to set them up for both TCP and UDP protocols, and to keep them the same number. (I only specify this in case the port forwarding that may have been done was not the right variation).
On the Hamachi client, click System > Preferences > Settings.
If you are in the Basic Settings view, click the Advanced Settings link at the bottom.
Scroll down to the Peer Connections section, and enter the port values you set up in your port forward settings of the router/NAT in the Local TCP Address and Local UDP Address. You do not need to enter an IP Address, just the port number into the short box.
I hope this helps! A quick thing to note is that you will need to enter an IP Address if you have more than one active internet connection. You should enter the IP Address of the local adapter you want Hamachi to connect through.
Actually this was pretty interesting idea. Never thought about having issue with netword card. I have desktop PC, so I'm connected via Ethernet and can't connect through WiFi. BUT. I have a laptop. So I joined my laptop to our room. Relayed tunnel with my friend again. Between my PC and laptop is direct tunnel, which make sense cuz they're on the same network.
I believe the problem is in my router somewhere, because we had direct tunnel with my friend and everything was fine. Then my router broke and I had to buy a new once. Since then, we have relayed tunnel.
Unfortunately, I can't test it directly because my ISP have mac address lock. And it's currently locked on my router and if I connect it directly into my PC I won't connect at all. (The lock is there to secure that no one will use my IP addres. I live in high-rise / prefab house. I don't know how it's called in english. Building with multiple flats).
I believe that it's router's fault because it worked before. I don't have a software, but I have managment via IP address. I can log into my router via LAN address 184.108.40.206 and configure it. But I don't think that there is something helpful for me. Maybe I'm missing something. Did you mean something specific? I can look for it. Or provide a screenshots.